AMSOIL Synthetic 2-Cycle Injector Oil
| The AMSOIL Online Product Application Guide gives you fast, easy access to more than 20 years of vehicle data. |
 |
 |
Reduce friction and wear, improve throttle response and deliver maximum power. Clean-burning formulations prevent plug fouling and carbon deposits. Deliver quick, dependable starts. Reduce smoke and emissions and won't "load up" during prolonged idling. Provide outstanding cold temperature flow. Contain special anti-rust agents for off-season storage.
Product Code: AIO
Recommended for Applications Requiring the Following Specifications:
- API TC
- NMMA TC-WII, TC-W3
- JASO FC
Maximum protection for:
- Outboard motors
- Snowmobiles
- Motorcycles
- All air-cooled and water-cooled 2-cycle engines.
- Chainsaws
- ATVs
|
Product Description
AMSOIL Synthetic 2-Cycle Injector Oil is a superior quality lubricant which provides maximum protection and outstanding performance in all two-cycle gasoline engines.
Maximum Wear Protection
AMSOIL Synthetic 2-Cycle Oils are high film strength oils that virtually eliminate metal to metal contact so piston scuffing is prevented and wear is reduced. The high lubricity of AMSOIL Synthetic 2-Cycle Injector Oil reduces friction so operating temperatures are controlled and maximum engine performance is achieved.
Reduced Engine Deposits
AMSOIL Synthetic 2-Cycle Injector Oil contains top performing additives which have been tested and proven to minimize high temperature deposits. These oils resist oil breakdown from heat so they do not form gum, varnish, sludge or sticky deposits. Spark plug fouling and excessive carbon build-up in the combustion chamber, exhaust port and ring area are greatly reduced. In addition, the clean burn characteristics and lean mix ratios reduce smoke and exhaust emissions.
Prevents Rust and Corrosion
AMSOIL Synthetic 2-Cycle Injector Oils contain special rust and corrosion inhibitors, providing excellent off-season storage protection.
Outstanding Low Temperature Performance
AMSOIL Synthetic 2-Cycle Injector Oil mixes readily with fuel even in low temperatures. However, AMSOIL Synthetic 2-Cycle Injector Oil with its -45°F pour point and SAE #4 miscibility and fluidity rating, is better suited for severe cold. It is recommended for use in injector systems as well as 50:1 pre-mix. Also, AMSOIL Synthetic 2-Cycle Injector Oil will help ease starting because it does not solidify or get gummy in the motor which allows it to turn over more freely.
Application Recommendations
AMSOIL Synthetic 2-Cycle Injector Oil is recommended for use in all summer and winter two-cycle injector applications and for pre-mix applications at 50:1 mix ratios. Use AMSOIL Synthetic 2-Cycle Injector Oil wherever TC-W3 or API TC oils are specified in water-cooled or air-cooled motors. AMSOIL Synthetic 2-Cycle Injector Oil is recommended for all two-cycle injector applications, including outboard motors, snowmobiles, motorcycles, ATVs and personal watercraft. AMSOIL Synthetic 2-Cycle Injector Oil is compatible with and recommended for two-cycle applications using catalytic converters.
AMSOIL Synthetic 2-Cycle Injector Oil is compatible with other synthetic and petroleum TC-W3 type oils and may be mixed with them. It is recommended for use with gasoline fuels only.
For AMSOIL Injector Oil, mix at 50:1 mix ratio in either pre-mix or oil injection systems.
|
TYPICAL TECHNICAL PROPERTIES
AMSOIL Synthetic 2-Cycle Injector Oil
Product Data Revision Date: 01/02 |
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
7.5 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
43.7 |
|
Pour Point °C (°F) (ASTM D 97) |
-43 (-45) |
|
Flash Point °C (°F) (ASTM D 92) |
92 (198) |
| Color |
Blue |
|
SAE Miscibility/Fluidity Grade |
4 |
| Recommended for applications specifying API Service Classification: |
TC |
| NNMA Rating |
TC-W3 |
| JASO |
N/A |
50:1 Gasoline-To-Oil Ratio |
| Gallons of Gasoline |
Ounces of Oil to be Added |
| 1 |
2.5 |
| 2 |
5 |
| 3 |
8 |
| 4 |
10 |
| 5 |
13 |
|
6 |
15.5 |
|
